              
 
|
 |
 |
|
| |
| |
| |
PAPER TESTING APPARATUS AND MACHINES
SCT,Compression,Fluter,Burst,Micrometers,Cobb,Friction,Tensile Testers
Our Paper Testing Machines represents the latest dimension in testing verification. With a vast array of products to perform numerous tests, one will be given the ability to increase the efficiency and durability of their testing material. These equipment allows to make measures and tests of bursting strength, determination of the Humidity, Basis Weight, Friction, Compression, Short Span Compression SCT, Perforation, Porosity, Smoothness..., in samples of different thicknesses. We can meet the needs of global markets that have a wide range of products, facilities and budget constraints. |
|
|
|
| |
Short Span Compression Tester SCT
Measures compressive strength in short span SCT samples of paper and cardboard to international standards.
Designed to meet standards: ISO 9895 - TAPPI T826 - DIN 54518 - SCAN Q46 - UNE 57142 - BS 7325
Standard Features
- Digital display
- LYNX Compatible
- Built-in RS232 data output
- Clamping force 2300 ± 500 N
- Compatible with Quality Test Management LYNX Software System
|
|
| |
Samples Crush Tester
NOW, with Ultralight PC + LYNX Testing Software, included
The crush tester is used to measure the compressive strength of samples Paper (Liner & Medium) Corrugated Board: ECT - CMT - RCT - CCT- FCT - PAT.
According to standards:
RCT test :APPITA/AS 1301.407s, ISO 12192, SCAN P34, TAPPI T 822
CMT test : APPITA/AS 1301.434s, ISO 7263, SCAN P27, TAPPI T809
CCT test :SCAN P42, TAPPI T 843, UNE ISO 16945
Standard Features
|
|
|
| |
Medium Fluter (Concora type)
Is a simple laboratory device to simulate de corrugating of medium paper for CMT and CCT tests.
According to standards: ISO 7263 - DIN 53143 - TAPPI T809 - CPPA D24 - SCAN P27...
Standard Features
|
|
| |
Burst Tester "Mullen type"
With Laptop PC + Testing Software included
To determine the bursting resistance of Paper and Corrugated Board. According to standards: DIN EN ISO UNE 2758 – DIN EN ISO UNE 2759 - SCAN P25/P24 - TAPPI T403 / T807 / 810 PAPTAC D19P/D8 - BS 3137 - AP/AS 1301,403
Standard Features
- Units: in kPa – Kg/cm2 – Bar & PSI
- Measure range from:
- Paper: from 0 to 1500 kPa
- Board: from 200 to 5.000 kPa
- Statistics: Max - Min, Average and Standard Deviation
- Operating security system
- Pneumatic operation of clamping system
- Acrylic protection screen (tests area)
- Compatible with the Labo Test Management System LYNX
- LYNX Burst Testing software - basic level
- Laptop PC included (data acquisition and control)
|
|
| |
 |
|
| |
Micrometer (Paper)
To measure with accuracy of thickness of Paper - Cardboard Compact - Paperboard...
According to standards: BS DIN EN ISO UNE 534 - BS 3983 - PAPTAC D4 - SCAN P7 - TAPPI T 411
Standard Features
- Range: 0 - 10 mm (M5-P2) and 0-18 mm (M5-P3)
- Resolution M5-P2 model: 0,01 mm (10 microns)
- Resolution M5-P3 model: 0,001 mm (1 microns)
- Contact area: 2 cm2
- Contact pressure: 100 kPa ( 1 Kg/cm2 ) or (0,5 Kg/cm2) TAPPI
- Digital display with reset to “0” function
- Manual drive by ergonomic handle
- Robust and precise equipment
-
Compatible with the Labo Test Management System LYNX
|
|
| |
Micrometer (Tissue Paper)
To measure with accuracy of thickness of Tissue Paper...
According to standards: NF DIN EN ISO UNE 12625-3 - SCAN P47...
Standard Features
- Range: 0 - 10 mm
- Reading Resolution: 0,001 mm (1 microns)
- Contact area: 10 cm2
- Contact pressure: 2 kPa ( 20 g/cm2 )
- Digital display with reset to “0” function
- Manual drive by ergonomic handle
- Robust and precise equipment
-
Compatible with the Labo Test Management System LYNX
|
|
| |
COBB Sizing Tester
To determine the capacity of water absorption Paper - Paperboard...
According to standards: ISO 535 - TAPPI T441 - NF Q 03 018 - NF Q 03 035 - FEFCO 7 - DIN 53132 - EN BS 20535 - SCAN P12...
Standard Features
Quick clamping of the sample (by spring)
- Test area - 100-50-25 or 10 cm2 (to choose)
- Stainless steel
- hand roll – 10 Kg
- Soft rubber gasket
- All in stainless steel
|
|
| |
Friction Tester
With 15" Laptop PC + LYNX Testing Software+ LYNX Management Module with basic statistics, included
To determine the static and dynamic friction coefficients of Paper, Carton ...samples. According to the
ASTM D1894 - ASTM D2534 - ASTM D4521 - TAPPI T549 - ISO 8295 - ISO 15359 - BS 2782 pt8 - DIN 53375 Standards
Standard Features
|
|
| |
Tensile Tester
(Tensile- Compression - Tear - Static & Dynamic Friction...)
For determination of tensile strength and elongation of paper (Kraft, Liner, Tissue...)
The software allows to obtain the value of the T.E.A., which is the Tensile Energy Absorption (TEA) of the paper and which is defined as the area under the force-elongation (energy) curve.
According to Satandards: DIN EN ISO UNE 1924-2 / DIN EN ISO UNE 1924-3/ DIN ISO UNE 3781 / DIN ISO UNE 12625-4
/ DIN ISO UNE 12625-5 / DIN ISO UNE 15754/ FINAT-1-2-3 / SCAN P38 / SCAN P67/ TAPPI T494 / TAPPI T 456 / TAPPI T 541/ PAPTAC D34
Standard Features
-
Robust and highly accurate (max. capacity of force 1kN)
- Load cells are available 1000 - 500 - 250 - 100 - 50 or 10 N
-
Quick return to initial start position
-
With additional grips it is possible to make tests of :
Separation glued lines – Bending – Static & Dynamic Friction Coefficients – Tension / Compression
-
Compatible with/the Integral Test Management System LYNX
- LYNX Testing software - basic level
- LYNX Management Module with basic statistics
-
Laptop PC included (data acquisition and control)
|
|
| |
Internal Bond Tester - IBT
INTERNAL BOND TESTER model IBT
Method to determine of the internal bond strength of single and multi-ply paper and paperboard by dynamics delaminating Scott Bond method according TAPPI T569 om-09 –
Standard Features
-
Sample preparation integrated for 5 samples simultaneous (bonding, pressing, cutting)
-
Processor controlled clamping pressure and press time
-
4 measuring ranges approx. 52,5 J/m2 to 2100 J/m2 (Scott bond low and high included)
-
Statistic function (AVG – average value, DEV – standard deviation)
-
Selective indication of measurements in: J/m2, ft-lb/sq.in. or mJ/sq.in.
-
Monitoring of the climatic conditions
-
Output of measuring data and parameters to PC
-
Self calibrating
-
Automatic pendulum test according to DIN 51 222
-
Digital reading
-
Includes Cable and Test Software
|
|
|
| |
Permeability / Air Porosity Meter "GURLEY" 4190N + 4320 model
To quickly and accurately determine the Smoothness, Air Porosity and Softness
(or Compressibility) in paper and cardboard using the GURLEY method. This is the most popular and traditional model for the measurement of porosity / air
permeability in medium value materials. Materials with lower air permeability can also be
tested using optional plates with a smaller orifice diameter.
According to standards: TAPPI T460 - ASTM D 726 - APPITA / AS 1301-420 - BS 5926 - CPPA D.14 - ISO 5636/5 -
NF Q 03-078 - SCAN P-19 y P-53
This is the most popular and traditional model for the measurement of porosity / air
permeability in medium value materials. Materials with lower air permeability can also be
tested using optional plates with a smaller orifice diameter.
The Smoothness and Porosity Meter model S.P.S. 4190+4320 includes a 20-ounce cylinder, as
well as a 1.0-square-inch air-hole bottom pinch plate and top adapter.
This model is equipped with the 4320 Digital Module, it allows to control with great
accuracy the time in seconds of the air passage through the sample and also to be able to
connect the Smoothness and Porosity Meter to the LYNX System (Comprehensive
Computerized Laboratory Management).
Standard Features
- Digital reading in seconds(4320 model)
- Cylinder graduated 20 oz. and diameter measuring 1 square inch.
- Salida RS-232
- Compatible with the Integral Managemennt System LYNX
|
|
| |
Permeability / Porosity Meters "GURLEY" (Standard and Low Pressure)
To measure accurately the Smoothness & Air Permeability (or Porosity) of materials such as
paper and cardboard, wovens, plastics and membranes.
- Densometers are the accepted standard for measuring the porosity of materials such as papers, wovens, plastics and membranes.
- All Densometers measure the time required for a given volume and of air (25cc to 400cc) to flow through a standard area of material being tested under light uniform pressure.
- Certain models, such as the S-P-S Tester, are also used to measure surface smoothness and material softness (or compressibility) of materials tested..
- Manual and automatic units available.
According to Standards: TAPPI T460 - T536 - T490.
Standard Features
- Automatic and manuel test mode
- Output units: BEKK - BENDTSEN - GURLEY - SHEFIELD.
- Choice of various volumes of air
- Automatic calculation of Medium values of Standard Desviations
- Not require use of oil
- Pneumatic operation
- RS-232 output
- Compatible with the Integral Managemennt System LYNX
Air Permeabilimeter Gurley Standard and Low Pressure Catalog 
|
|
| |
Permeability / Porosity Meters "GURLEY" (High Pressure)
For measuring the porosity, air-permeability or air-resistance of materials
having low permeability. Typical materials include coated papers, plastics and
membranes. High Pressure units are recommended whenever a standard unit
would yield excessive easurement times.
According to Standards: TAPPI T-536-88 and ASTM D-726-58, Method B.
Standard Features
|
|
| |
Smoothness and Porosity Meter "GURLEY"
To measure accurately the Smoothness & Air Permeability (or Porosity) of paper and paperboard samples.
According to Standards: ISO 5636/5 - TAPPI T-460 - TAPPI T536 - ASTM D-726 - ASTM D-202 - APPITA/AS 1301-420 - BS
5926 - CPPA D-14 - SCAN P-19 - SCAN P-53.
The Model 4340 differs from the traditional manual densometers in several ways.
1/ The Model 4340 utilizes the latest mass flow and servo-regulator technology to provide a
quick, accurate test that is oil-free.
2/ Second, pneumatic cylinders insure both a consistent clamping pressure as well as an
automatic test feature; which allows the user to test a sample several times without constantly
opening and closing the test area by hand.
3/ With the addition of an auto-drive mechanism, the user can program the number tests as
well as the span they are tested over. Therefore, a sheet or strip of paper can be analyzed
automatically, with output in either Gurley seconds, Sheffield, Bendsten or Bekk equivalent
seconds.
Standard Features
- Automatic and manuel test mode
- Output units: BEKK - BENDTSEN - GURLEY - SHEFIELD.
- Choice of various volumes of air
- Automatic calculation of Medium values of Standard Desviations
- Not require use of oil
- Pneumatic operation
- RS-232 output
- Compatible with the Integral Managemennt System LYNX
|
|
| |
Tearing Tester "Elmendorf method"
For determinig the Tearing Resistance of Paper and Board. According to the standards: ISO 6383-2 -
DIN EN ISO UNE 1974 - ASTM D 1922 - ASTM D 1424 -
TAPPI T414 -
DIN EN ISO UNE 13937-1…
Standard Features
- Computer controlled tester
- Included Software, desktop PC with Windows O.S.
- Fast and easy data acquisition
- Pneumatic clamping and release device of the sample
- Integrated sample cutter
- Tearing range is easy to change
- Selectable capacities of the pendulum
- Assistant system of horizontal adjustment by compuetr
- Computer controls test, multifond units display
- Easy to operate
- The testers is supplied with one of both Basic pendulum to choose
- Compatible with the Integral Managemennt System LYNX
|
|
| |
Moisture Analyzer
To accurately measure the moisture Paper and Cardboard. We also can be used as precision balance in other uses within the laboratory.
Standard Features
-
Real capacity: 50 g
-
Resolution: 0,001 g
-
Plate size: 80 mm diameter
-
Halogen quartz technology
-
Minimun specimen weight: 2 g
-
Moisture resolution: 0,01 %
-
Drying time: 2 - 20 minutes
-
Temperature range of heating: 50 a 160ºC
-
Automatic correction of the temperature
-
RS-232 output
-
Compatible with the Integral Managemennt System LYNX
|
|
| |
Precision Ovens
For drying samples of Paper and Cardboard and then determine the water content (% moisture) with the help of a Precision Balance .
Standard Features
|
|
|
| |
Precision Balances
To weighing precision in the laboratory
Standard Features
- Capacity between 110 g until 8000 g, resolutions 0,1 mg to 1 g
- Digital reading
- Stainless Steel plates
- RS-232 Output
- Compatible with the Integral Managemennt System LYNX
|
|
| |
Moisture Meter for Baled Paper
To measure "in situ" the moisture or content in water of paper and board baled to recycle.
Standard Features
- Direct reading of moisture between 5 y 25 %
- LCD Display
- Work with a standard battery
- Easy to use
DC-2000BP Moisture Meter Catalog
|
|
| |
Moisture Meters for Paper Reels
To measure "in situ" the moisture or content in water of Paper and Cardboard reel in movement during the process of manufacture or in static in the warehouses
Standard Features
- Direct reading of moisture in %
- Works with a standard 9V blockbattery
- Easy to use
- With contact electrodes
Portable Moisture Meters Catalog |
|
|
|
